Amacandelo amabini, izinto eziqinileyo eziphezulu, i-zinc phosphate epoxy primer kunye nedyasi yokwakha
Intshayelelo
Amacandelo amabini, aqinileyo aphezulu, i-zinc phosphate epoxy primer eyenziwe nge-epoxy resin, i-zinc phosphate anti-rust pigment, i-solvent, i-agent encedisayo kunye ne-polyamide yokunyanga i-agent.
Iimbonakalo
• I-epoxy primer okanye isambatho sokwakha kwiinkqubo zokukhusela ezikhuselayo
• Uxhathiso olugqwesileyo lokutya kwi-atmospheri exposure
• Inyanga kumaqondo obushushu ukuya kuthi ga ku -5°C (23°F)
• Ubuninzi.ngaphezu kwexesha lokugquma alikhawulelwanga
• Ukunyanga ngesantya kwimveliso yentsimbi
• Uluhlu olubanzi lwesicelo
Usetyenziso olucetyiswayo
Iinjongo ezininzi ze-epoxy primer okanye ipeyinti ephakathi yesakhiwo sentsimbi kunye nentsimbi ye-galvanized kwiindawo ezahlukeneyo zomoya.
Ifanelekile kwintsimbi entsha okanye iinjongo zokulungisa.
Imiyalelo yesicelo
Isubstrate esebenzayo kunye noNyango loMphezulu:
Intsimbi: uqhushumbo lucocwe ukuya kwi-Sa2.5 (ISO8501-1), iprofayili yokuqhushumba Rz35μm~75μm (ISO8503-1)
Iyasebenza kwaye iyanyangwa:
Ubushushu bemo yendalo esingqongileyo kufuneka bube ukusuka kwi-5℃ ukuya kwi-38℃, ukufuma komoya okuhambelanayo akufunekanga kube ngaphezu kwe-85%.
Ubushushu be-substrate ngexesha lokufakwa kunye nokunyanga kufuneka lube yi-3℃ ngaphezu kwendawo yombethe.
Ubomi bembiza
| 5℃ | 15℃ | 25℃ | 35℃ |
| 5 iiyure. | Iiyure ezi-4. | Iiyure ezi-2. | 1.5 iiyure |
Iindlela zokusetyenziswa
Isitshizi esingenamoya/isitshizi somoya
I-brush kunye ne-roller yokugqoka inconywa kuphela ngengubo yomgca, ukugquma kwendawo encinci okanye uthinte phezulu.
Iiparamitha zeSicelo
| Indlela yokusetyenziswa | Iyunithi | Isitshizi esingenamoya | Isitshizi somoya | Ibrashi/iRola |
| Nozzle orifice | mm | 0.43～0.53 | 1.8～2.2 | —- |
| Uxinzelelo lombhobho | kg/cm2 | 150～200 | 3～4 | —- |
| Thinner | % | 0～10 | 10～20 | 5～10 |
Ukomisa kunye nokuNyanga
| Ubushushu bomphezulu weSubstrate | 5℃ | 15℃ | 25℃ | 35℃ |
| Umphezulu-womile | Iiyure ezi-4 | Iiyure ezi-2 | Iyure e-1 | 30mins |
| Ngoma | Iiyure ezingama-24 | Iiyure ezili-16 | 12hrs | Iiyure ezisi-8 |
| Isithuba sokugquma | Iiyure ezingama-20 | Iiyure ezili-16 | 12hrs | Iiyure ezisi-8 |
| Imeko yokugquma | Ngaphambi kokufaka idyasi elandelwayo, umphezulu kufuneka ucoceke, wome kwaye ungabi natyuwa ye-zinc kunye nezinto ezingcolisayo. | |||
Ukwaleka okwandulelayo kunye nesiphumo
Idyasi eyandulelayo:Isinyithi esinentsimbi, idiphu eshushu, isitshizi esishushu ngonyango lomphezulu we-ISO-Sa2½ okanye i-St3.I-primer yevenkile evunyiweyo, i-zinc rich primer, i-epoxy primer….
Idyasi yesiphumo:I-Epoxy, i-polyurethane, i-fluorocarbon ... njl.
Ayihambelani neepeyinti zealkyd.
Ukupakisha kunye noGcino
Ubungakanani bepakethe:isiseko 25kg, arhente yokunyanga 2.5kg
Indawo yokuflasha:>25℃(Umxube)
Ugcino :Kufuneka igcinwe ngokuhambelana nemigaqo yorhulumente wasekhaya.Indawo yokugcina kufuneka yomile, ipholile, ingene umoya kwaye ingabikho kubushushu kunye nemithombo yomlilo.Ipheyile kufuneka igcinwe ivaliwe ngokuqinileyo.